Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
WARNING!Read all safety warnings and all instructions. Failure to follow
all warnings and instructions may result in electric shock, fire or serious
Injury.
Save all warnings and instructions for future reference
To use this tool properly, you must observe all safety warnings, assembly,
operating and maintenance instructions in this manual. Always follow
regulations regarding use in the area the tool is being used. Do not allow
children, or a person physically incapable of operating the tool.Always
be aware, and take precautions against potential hazards during use
and maintenance of the tool. These include, but are not limited to, the
following:
Contact with the blade.
Kickback.
Blade fracture.
Catapulting of blade pieces.
Damage to eyes if effective safety glasses of protective shields are not worn.
Damage to ears if effective ear protection is not worn.
WARNING!When using power tools, basic safety precautions should
always be taken to reduce the risk of fire, electric shock, and personal
injury. Always follow the safety instructions in this manual.
1.
Keep the work area clean and tidy. Cluttered areas and benches invite
accidents and injury.
Consider the environment which you are working. Do not use power
2.
tools in damp or wet locations. Keep the work area well lit. Do not
expose power tools to rain and high humidity. Do not use power tools in
the presence of flammable liquids or gases.
3.
Keep visitors away from the work area, All visitors and onlookers,
especially children and infirm people should be kept well away from
where you are working. Do not let others in the vicinity make contact
with the tool.
4.
Store tools safely. When not in use, tools should be stored in a dry,
high place or locked up out of reach.
5.
Do not force the tool for the job. The tool will do the job better and safer
working at the rate for which it was designed.
6.
Use the correct tools for the job. Do not force small tools or attachments
to do the job best handled by a heavier duty tool. Never use a tool for a
purpose other than that for which it was intended.
7.
Dress correctly. Do not wear loose clothing or jewelry. They can be
caught in moving parts. Rubber gloves and non-slip footwear are
recommended when working outdoors. If you have long hair, wear a
protective hair covering.
3
Publicité
Table des Matières
