Labels And Symbols - SLEEK me Mode D'emploi

labels and symbols

The nameplate label is adhered to the bottom of your sleek system. It
displays the manufacturer's name & address, the system's part & LOT
numbers, electrical requirements and regulatory standards that the
system is designed to comply with.
Manufacturer
WEEE – Waste Electrical and Electronic Equipment
Follow operating instructions
Class II equipment
Degree of protection against electric type BF applied part
Do Not use in wet environment
CE Mark
17
Degree of protection against ingress water: IPX2; IP22
This device is not suitable for use in the presence of flammable anesthetic
mixture with air or with Oxygen or Nitrous Oxide.
• Light spectrum: 550 – 1200 nm
• Max Optical Energy: 4J/cm2
• RF Wave frequency: 6.78 MHz
• Max Radiofrequency power: 5 Watts
• Pulse Light repetition rate: up to 2 Hz (1 pulse every 0.5 second)
safety standards
• IEC/EN 60335-1: 2002 (A1:2004; A2:2009)
• EN 60335-2-8: 2003+A1:2005+A2:2008
• EN 60335-2-23: 2003
• EN 60335-2-27: 2009
• IEC 60601-1: 2005 3rd Ed. / EN 60601-1:2006 3rd Ed.
• IEC 60601-1-11
emc standards
• EN 61000-6-1: 2007
• EN 61000-6-3: 2007
• IEC 60601-1-2: 2007
Electrical Rating: 100-240 VAC, 50/60 Hz
Dimensions and weight 18 x 18 x 6 cm [W x L x H) 1 Kg
18
mepower.com