TRENDware TE-PCIWTplus Guide D'installation Rapide page 2

TE-PCIWTplus / TE-PCIW plus
English
Win95 (OSR2) quick installation guide
1. Turn off the computer and disconnect the power cord from the computer.
2. Open the computer cover.
3. Install the card in an available PCI slot, and secure the card with a screw.
4. Put the computer cover back on, connect the computer power cord, and turn on the
computer.
5. The computer will boot to Win95 and Win95 recognizes the card and prompts "new
hardware found...", "PCI Ethernet Adapter".
6. At "update device driver wizard", insert the driver diskette for TEPCIW+ and click
"next".
7. Win95 will find "Realtek RTL8029(AS) PCI Ethernet NIC", click "Finish".
8. At "copying files", Win95 prompts "the file netrtp.inf on Realtek driver diskette
could not be found....". At "copy files from:", type in the correct path of the driver
diskette (i.e. A:) and click "OK".
9. Windows will prompt "Insert disk labeled Win95 CD ROM", put the CD ROM in
the drive and then click "OK".
10. At "Copying files ", Win95 prompts "the file arp.exe on Win95 CD ROM could not
be found...". At "copy files from:", type in the correct path of the Win95 CD ROM
(i.e. D:\win95), and then click "OK".
11. Windows will copy files from the CD ROM.
12. During the file copying process, if Windows prompts "a file been copied is older
than the existing file..." click "yes" to keep the existing file.
13. After the copying files process completed, click "start", select "shut down", and
select "restart computer".
Note: the files with .sys and .inf extension that Win95 could not find are in the driver
diskette's root directory or Win95 directory. All other files that Win95 could not find are
in Win95 CD ROM.
Win98 (SE) quick installation guide
1. Repeat above steps 1~4.
2. The computer will boot to Win95 and Win95 recognizes the card and prompts "new
hardware found...", "PCI Ethernet Adapter". "Realtek RTL8029(AS) Ethernet
NIC".
3. At "Insert Disk", insert Win98 CD ROM and click "OK".
4. Win98 will prompt "...file could not be found...", at "Copy files from:", type in the
correct CD ROM drive path (i.e. D:\Win98) and then click "OK".
5. Click "yes" to restart the computer.
Note: the files with .sys and .inf extension that Win98 could not find are in the driver
diskette's root directory or Win98 directory. All other files that Win95 could not find are
in Win98 CD ROM.
Win2000 quick installation guide
This adapter card has been tested with Win2000 (NT5.0) Release Candidate 2
(September 1999) which was the most current Win2000 version at the time we released
this adapter. After the card is installed in the computer, boot computer to Win2000and
Win2000 will automatically install the Realtek RTL8029 Ethernet NIC driver and it will
not prompt user for any additional CD ROM or driver diskette.
For new driver update, please visit our web site at www.trendware.com.