Publicité
Les langues disponibles
Les langues disponibles
use, or if these instructions are not
complied with.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances including replacement of
the power cord must be carried out by
qualifi ed personnel. If repairs are needed,
please send the appliance to one of our
customer
service
addresses can be found in the appendix to
this manual.
General information
A foot massage helps to reduce tension in
muscle and tissue areas, enhancing the blood
circulation and simultaneously stimulating
the metabolic process, thus cleansing the
body tissue of waste residues.
–
Th e massage attachment for the foot-
refl ex zones is fi tted between the foot pads
and can be removed for cleaning.
By moving the foot backwards and
forwards over the roller massage element,
you will enjoy a soothing massage of the
sole.
–
In order to enhance the massage eff ect,
a foot massage should be applied using
warm water. A non-foaming bath gel may
be added.
–
Th e integral heating element located
underneath the studded foot pads
prevents the warm water from cooling
down too fast, although it is not designed
to heat up the water.
Th e user is recommended to refrain from
massage treatment when suff ering from
phlebitis in the legs, varicose veins (if
they tend to bleed easily), swollen feet or
any pain of unknown origin. If in doubt,
consult your doctor before using the
appliance.
departments.
Th e
Control settings
Unit is switched off
Massage
Heating + bubble function
Heating + bubble function +
massage
Operation
–
Place the foot massager on the fl oor in
front of a chair.
–
If required, fi t the massage attachment
into its mounting.
–
Fill with warm water until the indicated
water level is reached.
–
Insert the plug into the wall socket. Make
sure that the control switch is in the "0"
position.
–
Seat yourself comfortably on the chair and
position your feet on the foot pads. Do not
stand on the unit.
–
Select the desired function with the control
switch. Th e recommended application
time is 10 to 20 minutes.
–
Aft er use, set the control switch to "
again before removing the plug from the
wall socket.
–
Empty out the water aft erwards, using one
of the emptying-out recesses.
Cleaning and care
Before cleaning the appliance, ensure it is
disconnected from the power supply.
To avoid the risk of electric shock, do not
clean the housing of the foot-massager
with water and do not immerse it in
water.
Do not use abrasives or harsh cleaning
solutions.
–
Th e inside and outside of the foot-
massager may be cleaned with a slightly
damp lint-free cloth. Use household tissue
paper to wipe dry aft erwards. Special,
9
0"
Publicité
