JVC KD-ADV5580 Manuel D'instructions page 34

Menu Item
MONITOR TYPE
OSD POSITION
DIGITAL AUDIO
OUTPUT
DOWN MIX
D. RANGE
COMPRESSION
FILE TYPE (DISC) Select playback file type when a disc contains different types of files.
34
Select the monitor type to watch a wide screen picture on your monitor.
Select the on-screen bar position on the monitor.
• 1
• 2
Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
• OFF
• PCM ONLY
• DOLBY DIGITAL/PCM
• STREAM/PCM
When playing back a multi-channel disc, this setting affects the signals reproduced
through the LINE OUT jacks (and through the DIGITAL OUT terminal when "PCM
ONLY" is selected for "DIGITAL AUDIO OUTPUT").
• SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
• STEREO
You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
• AUTO
• ON
• AUDIO
• VIDEO
• AUDIO + VIDEO
Setting
: Higher position
: Lower position (Guidance below the disc setup
menu will disappear.)
: Cancels.
: Select for an amplifier or a decoder incompatible
with Dolby Digital, MPEG Audio, or when
connecting to a recording device.
: Select for an amplifier or a decoder compatible
with Dolby Digital.
: Select for an amplifier or a decoder compatible
with Dolby Digital, and MPEG Audio.
connecting an amplifier compatible with Dolby
Surround.
: Normally select this.
: Select to apply the effect to multi-channel
encoded software (excluding 1-channel and
2-channel software).
: Select to always use this function.
: Play MP3/WMA/WAV files.
: Play MPEG Video files.
: Play MP3/WMA/WAV/MPEG Video files.