IVT PS-300 Notice D'utilisation page 8

• Avoid sudden differences in temperature! This may cause the formation of condensation water in the Power Station!
In this case, the Power Station must be adjusted to the new ambient temperature before start at a well ventilated
place for a least one hour.
• Keep the Power Station away from ignition sources or open fire; do not smoke during the charging procedure!
Explosion hazard!
• Never open the Power Station! Even after disconnecting the device from mains there may be hazardous voltages in
the interior of the device. This is why service and repairs may only be carried out by authorized and qualified
personnel.
Improper assembly may cause hazardous contact voltages even on the closed device!
Notes on the rechargeable battery
Lead-acid batteries contain aggressive corrosive acids. Avoid eye and skin contact with liquids from the lead-acid battery!
Never disassemble lead-acid batteries! Wash the parts of the skin affected thoroughly with water and soap. If acid enters
the eye, immediately flood the eye with running, clear and cool water! The, seek medical help immediately! If acid
contacts your clothing, wash immediately with soap and water!
OPERATION AND DISPLAY ELEMENTS
1: 230 V AC max. 300 W output
2: 12 V DC max. 10 A output
3: On/Off switch for 230 V AC output
4: Battery control indicator for 230 V AC
5: Fuse for 12 V DC output
6: On/Off switch for 12 V DC output
7: Battery control indicator for 12 V DC
8: Charging socket for 12 V charging
adapter
9: Charging socket for battery charger
10: Charging mode indicator
11: 12 V lead mode
11 + 13: 12 V lithium mode
12: Mode selection
13: 6 V lead mode
14: Error indicator
8