Velleman PCUSB22 Notice D'emploi page 3

USB 2.0 HUB + DIGITAL CLOCK AND MOOD LIGHT
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted
municipal waste; it should be taken to a specialized company for recycling. This device
should be returned to your distributor or to a local recycling service. Respect the local
environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, do not install or use it and contact your dealer.
2. Operation
• Open the battery compartment at the bottom of the clock and insert 1 x V301, V12GA or V386AC
type battery (V301 type incl.). Respect the polarity.
• Next, connect the clock to a USB port. ONLY CONNECT TO A USB 1.X OR USB 2.0!
• Press MODE twice to enter the setting mode. Adjust with SET and confirm with MODE.
• In time display, press MODE once to set the automatic time/date display mode. The time and date
display will alternate.
• In normal display mode, press SET to display sequentially the time, the date and the seconds.
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
PCUSB22
PCUSB22
3
VELLEMAN