Use Instruction - Beper 90.365H Manuel D'instructions

Microwave oven Use instructions
DESCRIPTION Fig.1
1 – Control panel
1A – Power setting button
1B – Timer
2 – Opening door button
3 – Rotating axis
4 – Rotating ring
5 – Turntable
6 – Viewing window
7 – Door interlock
8 – Vents
9 – Cord supply

USE INSTRUCTION

INSTALLATION OF THE MICROWAVE OVEN
Remove all the packaging and accessories. Examine the oven to make sure the inside part or the
door (6) are not damaged. Do not install the oven if it is damaged.
Place the microwave oven on a flat surface with enough space for ventilation inlet and outlet.
A minimum space of 7.5 cm is required between the microwave oven and adjacent walls. One side
must be open.Fig.2
Allow a minimum clearance of 30 cm above the oven.
Blocking the entrance and/or output can damage the oven.
Do not remove the feet located on the bottom of the oven.
Place the oven as far as possible from the radio or television. The operation of the microwave oven
can cause interference to radio or television.
Connect the microwave oven to the electrical outlet, make sure the voltage is equal to that indicated
on the label of the oven.
!ATTENTION!
Do not install the microwave oven on a stove or other appliances that produce heat. If the unit is
installed on or near a heat source, the oven could be damaged and make void the warranty.
INSTALLATION OF TURNTABLE Fig.4
Place the rotating ring (4) on the rotating axis inside the microwave oven.
Place the turntable (5) on the rotating ring and fit on the rotating axis (3) so that the turntable fits well
on the rotating axis (3).
It is very important that the turntable is placed safely to ensure correct rotation of the food while
cooking.
8
5
7
6
22
9
A
1
B
2
4 3