Technical Data - Beper 90.393 Manuel D'instructions

Electric Kettle Use instructions
To remove lime scale, use:
White wine vinegar 8°:
Fill the kettle with ½ liter of vinegar.
Let it for about one hour without heat it.
Empty the kettle and rinse 5 or 6 times.
Repeat if necessary.
Acid citric:
Make boiled 1 liter of water – add 25 g of acid citric and let it rest for about 15 minutes.
Empty the kettle and rinse it 5 or 6 times.
Repeat if necessary.
Do not use other methods or detergents to remove lime scale.
In case of :
Use while empty
The kettle is on but without water in or the tartar activates the safety system and block the unit:
let the kettle cool down and fill it with water. Use the switch to turn it on: the kettle start again after
approx. 15 minutes.
Water smell as "new"
It happens when the appliance is new. When used to the first time throw water several times. If the
problem remains, fill the kettle to MAX. level, and add 2 spoons of bicarbonate.
Make it boiled, throw water and rinse the unit.

TECHNICAL DATA

Power: 2200W
Power supply: 220-240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
11