FireBoard FBX11 Mode D'emploi page 3

Setting up your FireBoard - One Time Setup
Turn your FireBoard on by holding the Power Button (
When on, holding the power button 2 seconds will start powering it down.
Download the FireBoard
Our app can be found on the Apple App Store or Google Play under "FireBoard
You can then setup a free FireBoard Account via the app.
Add your FireBoard to your account.
After downloading the app, you should be able to add your FireBoard under Devices > Add
FireBoard (the app will scan for devices automatically, via Bluetooth). The Serial Number shown
in the app should match the Serial Number on the underside of the FireBoard.
3 Configure your wireless network.
You should now see your FireBoard listed in your devices, and can proceed to edit its
settings. Under Device > Manage Wireless, you can enter your Wireless name & password.
This can take up to a minute to complete.
Connect temperature probes.
4 4
Your FireBoard will sample the temperature every 5 seconds for each probe connected to
the six channel ports.
A Note about Bluetooth and Wireless Connectivity:
The FireBoard utilizes a Bluetooth 4.0 (BLE) connection (connected to a mobile device) and Wireless (WiFi)
to communicate with the FireBoard servers. Several key features pertaining to these connections are:
• Traditional Bluetooth "pairing" is not necessary with BLE connections.
• The BLE connection is used to discover FireBoard devices, and initially to setup WiFi.
• The FireBoard will also utilize the BLE connection to transmit temperature data to a mobile device, in the
event the FireBoard is not connected to WiFi.
®
App.
) 2 seconds.
power
® ".
EN
3