Led Keyboard; Multi-Color Led Keyboard - Captiva G14M 20V3 Guide Utilisateur Concis

LED Keyboard

The LED Keyboard application can be accessed by click-
ing LED Keyboard in the Control Center (or by press-
ing the Fn plus key) or from the Start menu in
Windows .
The keyboard LED may be configured using the Fn + key
combination outlined in the table below.
Keyboard LED Function key Combinations
Launch the LED Keyboard
Fn +
Application
Toggle the Keyboard LED
Fn +
On/Off
Keyboard LED Illumination
Fn +
Decrease
Keyboard LED Illumination
Increase
Fn +
Table 4 - Keyboard LEDs
Your system supports 2 types of keyboards:
• Multi-Color LED Keyboard - You can change the color
for the multi-color LED keyboard.
• Full Color "Per Key" LED Keyboard (Factory Option) -
You can change the colors for individual keys on the full
color "Per Key" LED Keyboard.

Multi-Color LED Keyboard

Click LED Keyboard in the Control Center to access
the LED Keyboard application.
Figure 13 - LED Keyboard Application (Multi-Color LED
Keyboard)
Color Swatch
The color swatch in the middle of the screen allows you to
select a range of colors for your keyboard backlight by
clicking on the color required. Click to select any color
from the swatch to apply to the keyboard.
KB Sleep Timer
Enable and then select the amount of time for which the
system is idle before the keyboard LED enters sleep mode
(i.e. the LED keyboard illumination will turn off to save
power).
KB Brightness
You can adjust the keyboard brightness using the Bright-
ness slider.
On boot the key-
board will mo-
mentarily flash.
You can click in
the Override
Boot Effect
check box to
disable the key-
board flashing
effect as the
system boots.
19