GE IM4D Manuel D'utilisation Et Instructions D'installation page 11

ICEMAKER INSTALLATION INSTRUCTIONS (Continued)
PLUG IN THE ICEMAKER
5
Holding the icemaker in place, insert the
icemaker power cord plug into the socket on the
side wall, making sure the prongs and holes are
matched. Press the plug firmly into the socket.
restraints click into place and the power cord is
still in the hook on the back of the icemaker.
MOUNT THE ICEMAKER
6
already installed in the refrigerator fits in the fill
cup opening. Hang the icemaker on the two
mounting screws in the side wall.
Make sure:
The power cord is still firmly in the socket.
fill tube extends into the fill cup opening
of the refrigerator to make sure the fill tube
has not been pushed out of the back of the
refrigerator).
the uppermost position of the mounting slots
on the icemaker bracket.
SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
49-60698-4
Installation Instructions
fill tube that was
OFF.
RE-INSTALL THE SHELF
SUPPORT, BUCKET, SHELF
AND BASKET
bucket, chiller shelf and storage basket by
reversing the steps in Step 1.
ATTACH WARRANTY LABEL
8
A label
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
KEEP THIS MANUAL
9
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner's Manual.
The icemaker installation inside the freezer is
now complete. Continue to the Water Valve
Assembly section on page 14.
11