Troubleshooting; Safety Instructions; Cause Of Malfunction And Repairs - Lattemento LM-217P Notice D'utilisation

Lattemento
live your style

Troubleshooting

GB

Safety instructions

Obey the following safety instructions to prevent dangers and property
damages:

Cause of malfunction and repairs

Faults
The indicator light does
not come on after swit-
ching on the device.
The device is heating
but the stirring rod
does not turn.
Milk exits from the lid.
NOTE
38
WARNING
Do not open the device. Only specialists are allowed to repair elec-
trical devices. Improper repair may cause signi cant dangers to the
user and may damage the device.
Possible cause
Plug not plugged in.
Circuit breaker has tripped.
Temperature control has
responded.
Lid not put on properly.
Contacts on handle soiled.
Device over lled.
Lid not put on properly.
Sealing ring missing or
soiled.
If you cannot solve the problem following the steps outlined above,
please contact the customer service.
Milkfrother LM-217P
Repairs
Plug in plug.
Switch on circuit breaker.
Allow device to cool
down.
Place the lid correctly and
turn it against the stop.
Clean contacts on handle.
Reduce lling level.
Place the lid correctly and
turn it against the stop.
Clean and insert sealing
ring.