dirna Bergstrom bycool green line COMPACT 1.4 Mode D'emploi page 29

COMPACT
1
1- Run the power supply cable from the unit through to the vehicle battery fuse box, attaching the plastic
mounts to the rear of the cabin and securing with flanges; then, with the cabin tilted, pass the cable
through the bottom, securing it with clamps and M4 screws; and through to the battery with flanges; use
the original cabling run. (Clean the area thoroughly before attaching the plastic mounts). When the unit
is connected to the battery, this will carry out a test of all the LEDs, displaying 88--bd and then going off.
IMPORTANT: Due to the equipment's complex electronic regulation system, the current connection
must be made directly to the vehicle battery fuse box, and not to any other point which services
other accessories of the vehicle, taking care not to invert the polarity when making the connection
(2). If polarity is inverted, the control plate does not come on and the unit does not work.
IMPORTANT: Please consult User's Guide before starting.
Detailed instructions
on power wiring assembly
29
Power wiring
EN
®