Mounting The Monitor - dji CRYSTALSKY CS785 Mode D'emploi

Mounting the Monitor

A
M5
Mount Part A of the
Mounting Bracket's
to the Monitor.
Lock the
Mounting Bracket.
DO NOT obstruct the built-in GNSS during use.
Connect the Monitor
When using the Mounting Bracket, plug the
connector on the Mounting Bracket to the remote
controller USB port.
When using without the Mounting Bracket, connect the Monitor to the remote
controller via a Micro USB cable.
DO NOT use the Type-C USB 2.0 HS port and Micro USB ports as the Micro
USB port will not work.
B
M6
M4
Mount Part B to
the Remote Controller.
Use a coin to adjust the
tightness of the pitch axis.
A
B
Ensure that Part B is
unlocked. Install Part
B into Part A.
5