Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Machine power
< 15 m
(W)
Minimum current admissible
750
6
1100
6
1600
10
2700
15
If a replacement power cord is required, it should be performed
by the manufacturer or its agent to avoid a hazard.
outra inForMaÇão/
adVertÊnCia
- If you experience any numbness
or tingling, or if there is a
discoloration of the skin of the hand
while using the machine, stop work
immediately.
Take frequent breaks and after each
period of use, exercise to increase
blood circulation. If you do not
make enough breaks, the effects
can become vibration syndrome
of hand-arm system, also called
Raynaud's phenomenon.
- Avoid using the machine in cold
weather (temperature less than or
equal to 10 ° C). Plan your work,
in order to reduce vibration.
- Exposure to noise emitted by the
device can also be limited.
\Book noisy work for specific times.
You should rest and limit working
hours. For your protection and that
of the people around, appropriate
hearing protection should be used.
- Limit the duration of daily
exposure.
Cable length (m)
< 25 m
< 50 m
by the cable (A)
6
6
6
10
10
15
15
20
SuPPlied
aCCeSSorieS
- 1 auxiliary handle
- 1 flat chisel
- 1 pointer
- 1 empty oiler
Correspondence
Current/Section
6A=>0,75 mm²
10A=>1,00 mm²
15A=>1,50 mm²
20A=>2,50 mm²
19
Publicité
Table des Matières
