General; Presentation - Eurovent MSW 3 Notice D'installation

F MARKING
This product marked
- Low voltage no. 73/23 EEC, modified 93/68 EEC,
GB
- Electromagnetic Compatibility no. 89/336 EEC, modified 92/31 and 93/68 EEC.
I
E
CONTENTS
D

1 - GENERAL

• The equipment must be installed, started-up and maintained by authorised and qualified personnel, in accordance with local
rules and professional standards.
1.1 - GENERAL SUPPLY CONDITIONS
• Generally speaking, the material is transported at the consignee's risk.
• The consignee must immediately provide the carrier with written reserves if he finds any damage caused during transport.
1.2 - VOLTAGE
• Before any operation, check that the voltage and the frequency indicated on the device corresponds with that of the mains.
1.3 - HYDRAULIC CIRCUIT
• Maximum water inlet temperature: 60°C.
• Maximum pressure: 3 bar.
1.4 - USE OF EQUIPMENT
• This equipment is intented for the air-conditioning of premises and to provide comfort for the personnel.

2 - PRESENTATION

• See technical documentation.
2.1 - DESCRIPTION
1 - Air inlet (suction)
2 - Air outlet (blowing)
3 - Vertical deflection louvre
4 - Horizontal deflection louvre
5 - Air filters
2
conforms to the essential requirements of the European Directives:
1 - General ................................................................................ 2
2 - Presentation ......................................................................... 2
3 - Installation ............................................................................ 3
4 - Connections ......................................................................... 4
5 - Starting ................................................................................. 8
6 - Maintenance ........................................................................ 9
7 - Wiring diagram ..................................................................... 9
1
5
Materials:
• Plastic body.
• Copper piping.
• Copper/aluminum exchanger.
4
2 3