Storage After Use; Cleaning And Maintenance; Cleaning The Housing - Harper XP800 Manuel D'utilisation

Storage after use

1. Remove the plug from the wall socket.
2. Press the rewind button and keep it pressed in; the power cord will automatically
rewind onto the reel.
Figure 8
PLEASE NOTE
• Guide the power cord whilst it rewinds onto the reel, since otherwise the cord
could become tangled or the plug could strike the back of the appliance. Take hold
of the power cord near the mark, and allow it to gently slide through your fingers
back into the appliance, see Figure 8.
Figure 9
3. Stand the vacuum cleaner upright. Retract the telescopic tube completely. An
attachment slot for the telescopic tube is fitted to the back of the vacuum cleaner,
next to the front castor (see Figure 9). Slide the bottom of the accessory bracket
into the slot. This avoids the need to dismantle the vacuum cleaner after use; you
can store the assembled appliance and retrieve it again quickly when you need it.

Cleaning and maintenance

Cleaning the housing

1. Remove the plug from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for
plastics.
3. Over the course of time dust and dirt can accumulate around the wheel axles,
thereby preventing the wheels from turning easily. Consequently they should be
kept clean.
Rewinding the power cord
Storing the vacuum cleaner