Operating Precautions; Maintenance And Cleaning - Kodak EP101WG Manuel D'installation

OPERATING PRECAUTIONS

The camera must not be installed in a location where the lens filter is exposed
to scratching and dirt.
- Do not expose the lens to direct sunlight or any reflective light source.
- Do not install near acid chemicals, ammoniac or a source of toxic gas emissions.
- The camera must be installed and used in compliance with local legislation

MAINTENANCE AND CLEANING

- Always unplug the product from the mains before carrying out any maintenance.
- Never use abrasive or corrosive substances to clean the products.
- Use a soft, slightly damp cloth.
- Never use an aerosol to spray the product as this may damage the internal workings.
RECYCLING
This logo indicates that devices which are no longer in use must not be
disposed of as household waste.
They are likely to contain hazardous substances which are dangerous to
both health and the environment.
Return the equipment to your local distributor or use the recycling collection
service provided by your local council.
Liz Invest SAS, 10 ZA La Lagune, 33450, Montussan, France hereby certify that KODAK Security Camera EP101WG
with CE Marking comply with the following Directive issued by the Commission of the European Community.
EMC Directive
Low Voltage Directive
Red Directive
RoHS Directive
Compliance with these directives implies conformity to the following European testing standards
EN55032: 2012+AC: 2013; EN61000-3-2:2014; EN61000-3-3:2013; EN55024:2010+A1:2015
EN60950: 2006+A11: 2009+A1:2010+A12+ 2011+A2: 2013
EN300 32t8 V2.1.1.(2016-11)
EN62321:2009
Authorized representative: David Haddad, President
24-Apr-2017
(2014/30/EU)
(2014/35/EU)
(2014/53/EU)
(2014/65/EU)
EN