Pre-Installation - Bigassfans The Garage Light Manuel D'installation

Lampe de garage gonflée
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INTRODUCTION
ATTENTION
This guide contains important instructions and safety information.
Read these instructions prior to installing and operating your light. Retain
this installation guide for maintenance and troubleshooting information.
Specifications
Model: BAS-SHL2-13-YY-XX-ZZ-@@
Electrical specifications: 120–277 VAC, 0.91 A, 107 W, 60 Hz
Weight: 16 lb (7.3 kg)
Dimensions: 23.09" × 9.18" × 4.63" (58.6 cm × 23.3 cm × 11.8 cm)
Power supply cord length: 10 ft (3 m)

Pre-Installation

The light includes a 10-ft (3-m) power supply cord with a plug. Ensure
power is routed to an approved outlet box at the ceiling before beginning
installation. Support the fixture so that it does not fall during installation.
Tools and hardware needed
Hardware
• (2) Ø1/4" steel zinc-plated S-hooks
• (2) Ø1/4" steel zinc-plated lag eye screws
Tools
• Stud finder
• Tape measure
• Drill and 3/16" or 4.75 mm bit
1
WWW.BIGASSLIGHT.COM
© 2016 DELTA T CORP.
ALL RIGHTS RESERVED.

Publicité

Table des Matières
loading

Table des Matières