EisSound KBSound Select Manuel De L'utilisateur page 9

8
4.5 Storing and Clearing Station Frequencies Automatically
To activate the
storing station frequencies automatically
When the automatic programming begins the screen will display the word "AUTO" .
The control unit will store into memory the stations that are received with the highest quality,
ordered from lowest frequency (87.5 MHz) to highest frequency (108.0 MHz).
The system will use all the memory slots available, reaching the maximum of 30.
The process can take a few moments. Once the scan has been completed or once the
maximum number of memory slots has been used, the process ends and a BEEP signal
To activate the
4.6 Adjusting Station Search Sensitivity
To adjust the automatic station search sensitivity (see 4.1. Station Search),
clearing station frequencies automatically
memory slots, hold down 7 key for 5".
hold down the 1 and 3 keys (1=minimum, 3= maximum) for 5"
process, hold down key 9 for 5".
sounds.
process for all the
Key Sequence Display
AUTO
5''
BIP
DEL MEM
5''
5''
SENS 2
5''
5''
CC-1128-05.1