AR DC7144A Mode D'emploi page 13

OPERATING INSTRUCTIONS
MODEL DC7144A
WARNING:
Do not exceed maximum power ratings. Do not drop. Internal
components are fragile.
Refer to drawing 10011694 at the end of this section for dimensions and connector locations.
Operation of the Model DC7144A is quite simple. The input signal is fed into the N male connector (J1)
marked INPUT and the output is taken from the N female connector (J2) marked OUTPUT.
Forward coupled output is taken from the jack (J3) marked FWD, and Reverse coupled output is taken from
the jack (J4) marked REV. Both coupled output jacks on the unit are Type N female.
See Specification Sheet for detailed specification.
Rev - 1