Plugger Studio Pocket Control Notice D'utilisation page 5

There are six transport buttons: [REW], [PLAY], [FF], [LOOP],
[STOP], and [REC]. These buttons transmit control change messages
or MMC (MIDI Machine Control) messages.
Assignable buttons
These two buttons can be used as MIDI CC or Note switches.
Bank buttons
Use this button to switch between the four banks. A "bank" is a
collection of parameter assignments for controllers (knobs, sliders, and
knobs, etc.) so that the controllers can be used to operate your DAW
or software synthesizer. The Pocket Control has four banks. The four
banks are collectively referred to as a "bank set". You can use the
Pocket Control software editor to change the assignment of each
controller.
5.bank LED
The LED of the selected bank will light up.
6. USB connector
Connect the Pocket Control to your computer with a USB cable
through this port.
Especificaciones:
- 9 botones de control asignables.
- 9 deslizadores de control asignables.
- 11 botones asignables.
- 6 botones de transporte asignables a controladores.
- 4 bancos para diferentes configuraciones.
- Interfaz USB, adaptable a USB 2.0 (FULL SPEED). Energía
suministrada por USB.
- Compatible con Win10 / 8/7 / XP / Vista y Mac OS X. No admite
unidad ni conexión en caliente.
Spanish
4