Using The Machine For The First Time - BOMANN CB 547 Mode D'emploi & Garantie

34573-05-CB 547 Brotbackautom. 11.07.2003 12:17 Uhr Seite 40

Using the machine for the first time

GB
Clean the baking tin and the rest of the equipment in the usual way by rinsing. Do
not use sharp objects and do not scour! The baking tin is non-stick coated. Grease
the baking tin and bake empty for about 10 minutes. Clean once more. Place the
kneading hook on the axle in the baking area.
Electrical connection
The machine must only be connected to a correctly installed 230 V, 50 Hz safety
socket.
A beep is heard, „3:00" appears shortly after on the LCD display and the colon bet-
ween „3" and „00" remains lit and does not flash.
The machine is now ready to operate and is automatically set to program "1"
(normal position), but has not yet started.
Functions & Operation
PROGRAM
This is used to select the baking program. Each time it is pressed (accompanied by
a short beep) the program changes. The current program in question appears on
the display.
DEGREE OF BROWNING
This is used to select a light, medium or dark colour for the crust.
START / STOP button:
This starts and stops or finishes the selected baking program.
START: In order to start a program, press for approx. 1 second on the "START /
STOP" button. A short beep is heard and the two dots in the time display begin to
flash and the program starts.
STOP: In order to stop a program, press the "START / STOP" button for approx. 3
seconds until a beep confirms that the program has been switched off.
On / Off
Two dots flashing: Program is switched on
Two dots continuously lit: Program is switched off
Delay
You may decide how long it will be before your bread is ready by putting in the time.
At first the baking method and degree of browning must be put in: "arrow pointing
upwards" = + 10 minutes, "arrow pointing downwards" = - 10 minutes. The time
40