Hdmi Output; Applications - Synchro Digital INOS1AND10-4.0 Mode D'emploi

Display
In the setting of the interface to select «Display» into the display settings
interface, rolling drop-down lists, select «Brightness», appeared the
following dialogue.
Screen standby
Screen standby: the delay before the screen standby automatic locking.
In the setting of the interface to select «display settings» into the display
settings interface, rolling drop-down lists, select «screen standby»,
appeared the following interface:
Note: during video broadcast, the screen automatically standby function
is invalid.

HDMI output

The product supports HDMI output.
Use the HDMI connecting cable to connect the MID and HDMI device with
input interface. About 5 seconds later, the systems will transfer to HDMI
output, HDMI will automatically output sound and image.
When using the HDMI output, LCD display content will scale the output to
the external device at the same time.

8. APPLICATIONS

Install the application: there are a variety of ways to install applications, for
example by USB setup, third party programs support installation. Here we
introduced the way to install with the TF card.
1- Enter the menu, select Settings - Security.
2- Press "Unknown sources"and then "OK" the following image will appear
EN
40