obsta 113655 Notice D'installation

Warning sphere 600mm 113655
INSTALLATION INSTRUCTIONS -
NOTICE D'INSTALLATION - NOTICIA
DE INSTALACIÓN - INSTALLA-
TIONSHINWEISE - ISTRUZIONI PER
L'INSTALLAZIONE - INSTRUCOES DE
INSTALACAO - MONTÁŽNÍ NÁVOD -
- 安装
指导书
Mounting of spheres :
1. Fit the screws with the washer and lock each assembly with the O-ring.
2. Assemble the 2 half spheres by positioning them on the cable. Make sure to insert
the nuts into the corresponding holes.
3. Assemble the washers and nuts in the order shown in the picture. And tighten the
nuts to 15Nm+/-1Nm
4. After tightening, check that the half spheres are close tting.
- 2 half spheres with xing accessories
- 6 bolts with washers see below
- Weight: 5Kg
- Size: 610mm
Tools
16 16