Using The Alarm Function; Setting Reminder; Inactivity Alarm - ADE FITVIGO AM 1700 Mode D'emploi

Using the alarm function

The alarm function is set via the FITvigo app.
1. Start the FITvigo app.
2. Tap Show alarm in the lower right hand corner.
3. Tap Add alarm at the bottom edge.
4. Tap Set alarm time.
5. Specify the time and tap OK.
6. Tick to select the desired alarm day.
7. Tap Save alarm 1.
The data will be transferred to the tracker
8. Tap Done.
The tracker will wake you up at the set time on the selected day by vibration.
Besides, the time and alarm symbol
− Tap the display to delete the indicated data.

Setting reminder

The reminder function is set via the FITvigo app.
The reminder itself occurs by vibration of the tracker, besides a text is displayed, which
you can enter yourself.
1. Start the FITvigo app.
2. Tap the bell symbol in the upper left hand corner.
3. Tap Add new reminder.
4. Enter the desired reminder text in the input flied in a brief and concise manner.
5. Set day and time.
6. Then tap again Add new reminder.
The tracker will vibrate and you will receive the entered text at the set time on the
selected day.

Inactivity alarm

If you make less than 100 steps within an hour in the period between 9 a.m. and 8 p.m.,
you will be reminded by the activity tracker about necessary movement:
The tracker will vibrate and show the symbol of inactivity
Activity Tracker AM 1700 | 1703 | 1704
will be shown on the display.
Using functionality
in the display.
25