Infrared Remote Control - PA WALLAMPtouch Guide De L'utilisateur

WALLAMtouch - 2 x10W wall amplifier - SD/BT/Radio/AUX/USB with touch screen and line output English

7 - Infrared remote control

1 - Standby button
2 - Mode selection button
3 - Mute button
4 - Pre-programmed equalization selection
button
5 - Menu button (not used)
6 - Playback and volume control area
7 - Playback mode selection button
8 - Numerical zone :
- In SD or USB mode you can directly enter
the number of a song.
- In FM mode you can directly enter a frequen-
cy from the FM band. If the entered frequency
is outside the range 0870-1080 the function
will be inoperative.
For example, to obtain the frequency 87.5
MHz you must enter 0875.