Vimar idea 16652 Notice Technique page 16

Connections
The electronic clock radio series idea must be used in connection with
VIMAR amplified speaker series idea art. 16656, 16656.B.
The clock radio can directly operate up to 6 amplified speakers
parallel connected (Fig. 1). To connect a higher number of speakers
(up to 15 max) to one single clock radio, it is necessary that these
are supplied at 12 V DC ±10% on terminals L1 L2 (Fig. 2). It is very
important that the polarities indicated on the instruction sheet
and engraved on the rear of the amplified speakers, are
properly aligned.
For a correct FM reception an insulated wire of cross sectional area
not smaller than 1.5 mm
connected as antenna to the terminal marked with the symbol
insulated wire can be left in the conduits of the electrical installation.
L1 L2 3
2 and not less than 1.5 m long, should be
16652
art.
4 5 6 7
Antenna
16656
art.
L1 L2
5
Connection from 1 to 6 speakers
15
12 V AC ±10% 50-60 Hz
12 V DC ±10%
Fig. 1
. The