BabyGo Car Seat Manuel D'utilisation page 17

SAFETY HARNESS SYSTEM
Locking &unlocking the harnes
1. Joined the harness buckle's two sides' parts together. Slide them into the central part, the
buckle is secured after you hear a positive click.
Note: when a child is sitting in the child restraint, you must check whether
the buckle is still secured very often.
2. To release the buckle, press the red button located on the buckle, pull out the two sides buck-
le tongue.
Adjust the length of harness
against the child's body. They should never be twisted or loose.
2.1. To tighten the harnesses, press the button located on the lock between the
child's legs. At the same time pull the harness coming out from the lock by
your anther hand.
2.2. To lengthen the harnesses, press the button on lock between the child's
two legs, then pull the two harnesses simultaneously in your direction by
your other hand. Please note while you're doing this, hold the harnesses,
not the harness cover.
Car Seat
17
17