Setting Up The Sensor - Sammode VOUET Série Notice De Montage

Setting up the sensor

Setting a threshold
A threshold can be set to prevent the lighting from switching
on unnecessarily when illuminance levels are sufficient. The
threshold indicates the maximum illuminance at which the
lighting switches on if motion is detected.
Value range
Position I
Position V
Setting a detection range
he detection range can be restricted to prevent the lighting from switching on unnecessarily because the range is too large.
The detection range indicates the diameter in which motion is detected.
Value range
Position I
Position V
Setting a run-on time
A run-on time can be set to prevent the lighting from switching on and
off unnecessarily. The run-on time starts after the last motion has been
detected. If further motion is registered in the detection range during
the run-on time, this time starts over again.
Value range
Position VII
Position I
Sammode SA
24 rue des Amandiers, F-75020 Paris
2 – 50 lx ; smooth adjustment or disable
Disable
threshold 2 lx
smooth adjustment; depends on installation height
maximum detection range
minimum detection range
30 s – 30 min ; smooth adjustment
30 min
30 s
5/5
Notice VOUET ... SENSOR
Octobre 2016