BASETech 1713919 Mode D'emploi page 3

Operating instructions
Laser Pointer Green Laser
Item no. 1713919
Intended use
The laser pointer is intended for pointing out details on objects, display boards, etc. Pointing at
persons and animals is not permitted.
The device is designed for battery operation only. Do not use any other power supply. The
required battery type is specified in the "Technical Data" section.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, eye injuries etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Laser pointer
• 2x AAA batteries
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• When operating the laser equipment, always make sure that the laser beam is
directed so that no one is in the projection area and that unintentionally reflected
beams (e.g., from reflective objects) cannot be directed into areas where people
are present.
• Laser radiation can be dangerous, if the laser beam or its reflection enters
unprotected eyes. Therefore, before using the laser equipment, familiarise yourself
with the statutory regulations and instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser
radiation can seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your
head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out
tasks with safety implications, such as working with machines, working from
great heights or close to high voltage. Also, do not operate any vehicles until the
irritation has completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled,
reflected beam may strike people or animals.
• Never open the device. Setting or maintenance tasks must only be executed by a
trained specialist familiar with potential hazards. Improperly executed adjustments
might result in dangerous laser radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages
are included in the package. If the sign on the laser is not written in the language
of your country, please affix the appropriate sign onto the laser.
• Caution: if operation settings or procedures other than those described
in these instructions are used, it could lead to exposure to dangerous
radiation.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Batteries
• Correct polarity must be observed while inserting the batteries.
• Batteries should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is risk, that children or pets swallow them.
• All batteries should be replaced at the same time. Mixing old and new batteries in
the device can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
Operating controls
1 Laser outlet - Caution! Here the laser beam exits!
2 Laser button
3 Battery compartment
Inserting/replacing the batteries
• To open the battery compartment (3), screw apart the shaft of the laser pointer.
• Insert two new 1.5 V AAA batteries in the battery compartment (3), paying attention to the
polarity. The minus pole of the battery must always point towards the laser outlet (1) (also
see illustration above).
• Screw the shaft of the laser pointer back together.
• If the projection gets darker, the batteries are becoming flat. Replace the cells with new ones
as described above.
Operation
Never point the laser beam directly at persons or animals.
• The laser pointer is switched on and off by means of the laser button (2).
• If the laser button (2) is depressed, the laser beam exits the laser outlet (1).
Care and cleaning
• Remove the batteries before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fiber-free cloth.
• Do not immerse the product in water.
2014