Installing & Removing The Pressure Lid; Using The Cooking Functions With The Pressure Lid; Pressure Cook - shark Ninja FOODI СOMPACT TENDERCRISP OP101C Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING YOUR FOODI™ COMPACT
TENDERCRISP™ PRESSURE COOKER – CONT .
INSTALLING & REMOVING
THE PRESSURE LID
Place the pressure lid on top of the unit with
the
on the lid and the
on the base lined
up evenly. Turn the lid clockwise until it
locks in place.
To unlock the pressure lid, turn it
counterclockwise. Lift it up and away
from you, as some steam will remain in the
unit and escape when the lid is opened.
NOTE: The pressure lid will not
unlock until the unit is completely
depressurized.
14
ninjakitchen.com
USING THE COOKING FUNCTIONS
WITH THE PRESSURE LID
To turn on the unit, plug the power cord into
a wall outlet, then press the Power button.

Pressure Cook

1
Place ingredients and at least
/
cup of
1
2
liquid in the pot, including an accessory
if your recipe calls for it. Do not exceed
the line marked PRESSURE MAX when
pressure cooking.
NOTE: When cooking rice, beans, or
other ingredients that expand, do not
fill the pot more than halfway.
2 Follow the steps to the left to install the
pressure lid. Turn the pressure release
valve to the SEAL position.
3 Press the PRESSURE button. The default
pressure level will display. Use the up and
down TEMP arrows to select either HIGH
or LOW.
NOTE: If running for 20 minutes or less,
the clock will count down by minutes
and seconds. If running for more than
20 minutes, the clock will count down
by minutes only.
4 Use the up and down TIME arrows to set
the cook time 1-minute increments up to
1 hour, and in 5-minute increments from
1 hour to 4 hours.
5 Press the
button. The display will
show rotating lights during this time.
When the unit reaches the proper
temperature, the time you set will begin
counting down.
6 When cook time is complete, the unit
will beep, automatically switch to Keep
Warm mode, and start counting up
from 00:00.
NOTE: After cooking is complete, you
may press the KEEP WARM button to
turn the Keep Warm mode off.
7 Let the unit naturally release pressure or,
if the recipe instructs, turn the pressure
release valve to the VENT position, quickly
releasing steam through the valve.
ninjakitchen.com
15

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour shark Ninja FOODI СOMPACT TENDERCRISP OP101C

Table des Matières