Vga; Headphone - MAS Elektronik XORO HTC 2233 HD Mode D'emploi

VGA

You can use the TV set as a PC monitor by using the VGA interface. Please connect a VGA cable
with the VGA input of the TV set and with the PC.
With this kind of connection only video signals are transmitted. For listening sound on the TV you
should establish also a sound connection. Please connect the white and red wire of the 2-pin
component cable with the AUDIO OUT (source) and the stereo jack with the "PC IN" plug of the TV
set.
Please press the INPUT button and choose „VGA" in the popup window. The VGA input is active.
Notes:
1. Before you connect the HTC TV set with the PC, please change the graphic resolution of the
PC to: 640 x 480, 800 x 600 or 1024 x 768.
2. Please establish the connection and switch to „PC-VGA" input.
3. For displaying the best results, please uses the native resolution of the TV LCD panel:
•
HTC 2233HD/ HTC2433HD —> 1920 x 1080 Pixel
Digital Coaxial Sound output
The specifications of DVB broadcast allows to transmit Stereo and/or Dolby Digital
sound. To output the Dolby Digital sound you can connect the TV set with a digital
amplifier and listen the sound by a connected speaker set.

Headphone

You can connect the a headphone on the TV set. Please insert the 3.5 phone
jack into the headphone connector.
20
Connection
HTC2233HD/2433HD