Connecting To A Tv - Coby Snapp CAM3001 Série Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connecting to a TV

Â
Â
To view your video and photo files on a bigger
screen, use the included A/V cable to connect your
camera to a television.
1.
Locate the Composite Video input connectors
on the TV.
Connect the cable's yellow RCA plug to the
Composite Video In jack of the TV.
Connect the cable's red RCA plug to the red
Audio In jack of the TV.
2.
Turn on the camera. Connect the cable's mini
plug to the A/V output jack located on the top
of the camera. The camera's screen will turn off
automatically.
3.
Turn on the TV. Set the TV's input source mode
to display the Composite Video signal. When
the TV source mode is set properly, you will see
the camera's display on the TV screen.
Connecting To A Tv
Connecting To A Tv
4.
Press
on the camera to place it Playback
mode. Use the playback mode controls to play
videos or watch photos on the TV.
Please refer to the documentation provided
with your TV If you need help setting its in-
put source mode.
INPUT
TV
Video
Audio
YELLOW
RED
WHITE
Page 13
Page 13

Publicité

Table des Matières
loading

Table des Matières