E2 technology E2 Mode D'emploi page 19

n After mounting the device, the socket must re-
main accessible.
n Devices without any integrated ON-OFF switch
require an all-pole separation from the network
with a minimum contact opening width of 3 mm
or a separation from the network by way of a
plug is required.
n Follow the local and/or national electro-techni-
cal safety regulations, such as ÖVE and VDE
when selecting the installation spot and in-
stalling an isolated ground receptacle.
n Caution! Some parts of the product may get
very hot and cause burns!
n Special caution is advised, if children and per-
sons in need of protection are present.
19