4. Function
4.1.
Control
Push-
through
agitator
shaft
Overload
protection
light
Power switch
light
Power switch
Speed control button
LED Display
Overload protection light
"Overload"
OS20
& OS40
series
Power switch light
Drill chuck
Push-through agitator shaft
Power switch
Items
"Speed"
"Power"
"I/O"
Figure 1
Set stirring speed, press the button to start/stop stirring
function.
LED displays speed value and warning code.
LED display light.
LED light shows red when starts overload protection. When
the torque reaches limited value, overload protection
function will be started. At the same time overload
protection light flashes, while the system stops running.
LED displays light.
LED light shows green when switch on.
Can be held stirring impellers.
If needed, shaft can push-through agitator.
Switch ON or OFF the instrument
Table 3
5
LED
Speed control
button
Drill chuck
Default settings
Disp
lay