How To Change The Batteries; How To Change The Time, Day, Month And Year - Redsun E200 Manuel D'utilisation Et D'installation

10. How to change the batteries

When the batteries start to run low, the battery icon starts to
blink. The controller continues to function normally.
After roughly 6 months, the device will cease to function and will
permanently display the battery icon.
Even with empty batteries, all settings will remain.
Disposal of batteries according to legislation.

11. How to change the time, day, month and year

The controller comes with a pre-set clock, which also automatically switches from day light savings
time to standard time. There should be no need to change these settings. However, should the
need arise, the settings can be changed in the following way.
Activate the clock mode:
Select DAY with button > and then Sunday with button +
With button > move through all 6 time/temperature events (without any modifi action) until the
pointer indicates the clock icon.
The time will now fl ash.
Set the time
Press the > button to select the day
Press the > button to select the month
Press the > button to select the year
Press the > button to return to the AUTO mode
44
by pressing the + / – button
Press the + / – button to change the setting
Press the + / – button to change the setting
Press the + / – button to change the setting
1 2 3 4 5 6 7
Man Auto Day