Light Switch; Maintenance And Cleaning - White&Brown TB 208 Mode D'emploi

BEFORE THE 1ST USE, REMOVE ALL PACKAGING AND PROTECTIONS FROM THE APPLIANCE.
- Plug the cord into the mains.
- The appliance starts automatically.
- Temperature displayed is the current temperature inside the wine cooler.
- The wine cooler starts at a starting value of 12°C.
- Allow the empty cooler to operate for approx. one hour. This will allow the wine cooler to reach the set temperature.
- Open the door and put inside the bottles.
TO CHANGE SET TEMPERATURE: (DESIRED TEMPERATURE TO DRINK THE WINE)
- The wine cooler starts at a starting value of 12°C.
- Anyway you can change to another temperature from 8°C to 18°C.
- Press delicately ▲ button, set temperature flashes on the display. Each time you press ▲ button, set temperature will increase by 1
degree.
- Press delicately ▼ button, set temperature flashes on the display. Each time you press ▼ button set temperature will decrease by 1
degree.
3 seconds after pressing ▲or ▼ button, temperature display will show the current temperature inside the wine cooler.

LIGHT SWITCH:

- Wine cooler contains a cool light inside (if you light on, it will not produce any kind of heat).
- Press delicately button to turn the light on.
- Press delicately again button to turn the light off.
- Always unplug the appliance before cleaning.
- To clean the glass door, use a glass cleaner or a damp cloth. Wipe dry with a cloth.
- To clean the exterior finish, use a damp, sudsy cloth. Rinse and dry with a cloth.
- Do not use metal scouring pads, as they might damage the finish.
- Clean regularly the dust filter with warm water and keep drying completely before replacing, or you can clean it with a vacuum
cleaner. Dust can increase consumption of electricity.
All manuals and user guides at all-guides.com
USING
WIPE ALL PARTS WITH A DAMP CLOTH.

MAINTENANCE AND CLEANING

7