IOGear KeySlate GKB641B Guide De Démarrage Rapide page 4

Charging KeySlate
Low Power Indicator
When KeySlate is low on power, the LED indicator will flash "Red" for
one minute. Recharge the keyboard by using the included micro USB
charging cable.
Charging KeySlate using the included Micro USB charging cable
1. Plug the USB type A connector into the USB port of any standard USB
power adapter. Plug the power adapter into a power outlet
2. Insert the Micro USB connector into the KeySlate Micro USB
charging port
3. The KeySlate LED indicator will light up "blue" to notify you that KeySlate
is charging. Once charging is complete, the LED indicator will turn off.
Note: KeySlate can also be charged by plugging it into a computer's
available USB port
Operation
Pairing KeySlate with your Apple device
1. Turn on the Bluetooth function on your device or computer by going into
the Bluetooth settings
2. Slide the KeySlate power switch to the ON position. KeySlate will now
go into pairing mode. If your device cannot see KeySlate, press and
hold the Pairing Button for 3 seconds until the blue LED flashes.
3. From the Bluetooth settings on your mobile device, select "BT4.0
Keyboard" from the list of available devices
4. Your device will now ask you if you would like to pair your device
with KeySlate
5. Your device will show "connected" after KeySlate has been successfully
paired to your device
Note: KeySlate can only be paired to one iOS device or computer at
a time
3