TIE TQ14 Manuel Utilisateur page 5

Simple connection, two devices simultaniously
1. Connect to the first Bluetooth device successfully
(see above) and then turn off the first Bluetooth device.
2. connect with the second Bluetooth device.
3. Turn on the first Bluetooth device.
4. Turn off the TQ14 and turn it on again. The status LED will
flash blue. The TQ14 now connects to the first and second
Bluetooth device successfully.
MAiN FeAtureS
Phone calls
when the headset is turned on and is connected to a phone or
a corresponding Bluetooth device with telephone function, you
can make calls. As soon as you dial a number on your telephone
you will hear the trunk signs in the headset. Answer incoming
calls with a single click on the MFB. to reject incoming calls just
double-click the MFB-button. if you want to redial the last num-
ber, just double-click the MFB (not available in playback mode).
Listen to music (playback mode)
verify that the earphone is connected to your mobile phone. As
soon as the devices are paired, you can listen to music. to stop
the playback or start it again, just click on the MFB.
Power off
click and hold the MFB as long until the status Led turns red.
If the device is not used for more than 5 minutes, it switches off
automatically. So you don't have to worry about battery life at all.
3