Description Of The Control Buttons - AEG EC 4831 Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

English

If your playing device supports the A2DP Profile

(Advanced Audio Distribution Profile) and has a music

player function, you can also use a wireless function to

transfer music to the appliance. The A2DP Profile is a

bluetooth profile made for all manufacturers. Stereo-au-

dio-signals are transferred wireless between the player

(source) and receiver appliance via streaming. In order

to be able to remote control the source, the player

must support the AVRCP Profile (Audio Video Remote

Control Profile).

Due to the different device manufacturers, models and

software versions, full functionality cannot be guaran-

teed.

• Registering devices (Pairing)

Turn on the appliance. If you are using the Bluetooth

function for the first time, you must pair the devices

first.

1. Turn on both devices. Ensure that the Bluetooth

function is activated in your player (for example

mobile phone). Consult the operating instruc-

tions of your player, if necessary.

2. Repeatedly push the SOURCE button (11), until

the BT-LED (3) lights up.

3. In your player, choose the Bluetooth menu and

operating instructions of your player, if neces-

sary. The device "AEG EC 4831" appears in your

player as a selection.

NOTE:

Only one player can be connected with the

speaker at a time. If the speaker is already con-

nected with another player, the speaker does

not appear in the BT selection menu.

4. Depending on the device manufacturer, models

and software versions you can now enter the

password "0000" in your player.

If the registration was successful, the BT-LED (3) is no

longer blinking. After registration, the process is as fol-

lows:

1. Turn on both devices. Activate Bluetooth on your

external player.

2. Repeatedly push the SOURCE button (11), until the

BT-LED (3) lights up and blinks.

3. Wait several seconds until both devices automati-

cally pair up. The BT-LED will stop blinking.

4. Play music on your external player as usual.

NOTE:

• Depending on the device manufacturer, you must

pair the devices again to connect them.

• Bluetooth compatibility cannot be guaranteed for

future players (for example mobile phones).

• In order to guarantee ideal connection, pay atten-

tion that the battery of your player is fully charged.

• Some mobile phone brands have an energy saving

mode. Deactivate the energy saving mode, as this

may otherwise cause problems in the data trans-

fers via Bluetooth.

• In order to be able to transfer audio data, Blue-

tooth must remain activated in your player. Consult

the operating instructions of your player, if neces-

sary.

• If you are using a mobile phone to play music

and receive an incoming call, the music will be

interrupted. The sound will not be played by the

speaker. After you finished the phone call, the

devices will be paired again and the play function

is continued.

AUX 1

1. Connect an external audio device (MP3-player, CD-

discman, iPod, iPhone/iPad etc.) to the AUX 1-socket

(15).

2. Switch on the appliance and repeatedly push the

SOURCE button (11) until the AUX 1 LED (4) lights

up.

3. Play the audio files on an external player as usual.

(Note: Turn the volume on the external player to

loud as the sound is too quiet otherwise).

AUX 2

1. Connect the AUDIO OUT sockets of an external

AV appliance (TV/DVD/VCR/DVR etc.) to the AUX 2

sockets on the back of the appliance using a con-

necting cable (not included in the scope of delivery).

2. Turn on the appliance as usual.

3. Repeatedly push the SOURCE button (11), until the

AUX 2-LED (5) lights up.

4. Play the video files on the AV appliance as usual.

(Note: Turn the volume on the external player to

loud as the sound is too quiet otherwise).