Bosch+Sohn Boso Medicus Uno Mode D'emploi page 63

Measurement display
Blood pressure is a dynamic parameter and
can be affected by the patient's position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
¬ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the start button again briefly.
Allow at least two minutes be-
2
tween measurements.
min
¬ If no further measurement is required,
remove the cuff from the arm.
EN
63