Maico ZP 2 Manuel D'installation page 6

Während der Initialisierung blinken alle
i
3 LED´s am Einfach-BDE. Am Kom-
fort-BDE (Touchscreen) erscheint eine
Infomeldung.
9. Alle Einstellungen und Funktionen testen.
5 Technische Daten
Abmessungen (LxB)
Bemessungsspannung
6 Entsorgung
Verpackungsmaterial gemäß den örtlichen
Bestimmungen entsorgen.
Installation instructions
UK
for additional circuit
board ZP 2
For applicable safety regulations
i
and further information 
Installation, commissioning and
maintenance instructions for
ventilation unit.
Dear installer,
Only a trained electrician is permitted to work
on the electrics. You are considered a trained
electrician if your specialist training and
experience
● means that you are familiar with the rele-
vant standards and guidelines
● enables you to correctly and safely under-
take the electrical connections in accordance
with the wiring diagram in the installation
instructions
● enables you to recognise and avoid risks
and hazards associated with electricity and
● you are able to recognise and avoid risks
resulting from incorrect installations and
settings and the resultant hazards.
6
63 x 44 mm
12 V
1 Scope of delivery
Additional circuit board ZP 2, bus connect-
ing cable, pressure tubing (2.5 m), pressure
connection socket, retrofit sticker and these
installation instructions.
2 Intended use
Additional circuit board ZP 2 makes the fol-
lowing functions possible:
● system operation with constant pressure:
supply air with pressure consistency or
exhaust air with pressure consistency
● Filter monitoring by measuring differential
pressure before and after the outside air
filter(s) of the ventilation unit.
A control function to suit the function is set
using the DIP switches.
For information about control  Commission-
ing and maintenance instructions for ventila-
tion unit, Additional circuit board ZP 2 chapter.
Read the safety instructions in the instal-
lation instructions for the ventilation unit
before installing the additional circuit
board. Follow the instructions.
3 Safety instructions
Danger from electric shock:
Before removing the front cover,
shut down all supply circuits (de-
activate the mains fuse) and se-
cure so they cannot be switched
back on. Attach warning sign in
clearly visible place.
Danger of injury when fans
are running: Before removing
the front cover, wait until both
fans have stopped.
Danger of burning from hot
housing parts on units with