Button Function - Eurotops 40864 Mode D'emploi

P 8550 / A5
C. USE AND INSTALLATION FOR REFLECTION FILM:
- Please Note: HUD projects dashboard information on the car front windscreen,
because the windscreen is double, which will make double reflection on the
windscreen when it works. The double reflection will be different cause of the
different windscreen. If you can see clear of the displaying information, then
there is no need to use the reflection film. If there is a double image, then
please use the reflection film.
First, please put the non-slip mat on the dashboard, and then put HUD on it. Reflection film can be stick to
the position right above the HUD position which can reflect host screen to windscreen.
1.Spray some water on the place that the film will be pasted on,and then use a dry cloth to clean it;
2. Take off the back side（marked 1) of reflection film,then paste it to the window glass.
3. After you have adjusted the location, you can use a scratch board or something else flat to slick the film
and squeeze the water inside out until there is no bubble or water in it.
4. Take off the protection film (marked 2) of the reflection film. If the film cannot display the whole
information, please adjust the non-slip mat to move the position.
- If you don't want reflect on the windshield,1 can directly see from the sit-up
HUD screen.
D. BUTTON FUNCTION:
1: Buzzer icon
2: Setting icon
3: Driving directions icon:west,north,east,south
4: Satellite signal icon - When the light change from red to green, it prove search satellite successfully
5: speed
6: light-sensor
7: Speed unit(km/miles)