Kodak WSP801 Manuel D'installation page 5

4.a Auto Pairing Method :
Plug the power switch to the
outlet and press the «pair»
button on the application.
the LED will flash, indicating the
Wireless Plug is sending out the
pairing signal. When the power
switch is successfully paired, it
will appear on the main page.
4.b Manual Pairing Method :
Plug the power switch to
the outlet. Press the
«pair» button on the
application and press
and hold the button
located in the front of the
Wireless Plug until the
blue LED is flashing.
Verifying the Setup :
After complete pairing, plug an electrical device in the
Wireless Plug and leave the ON / OFF button of the device
on ON position.
Tap the power switch icon on the main page to turn light
on and o .
EN