Periodical Maintenance - AGRICOW Doppia Mode D'emploi

Use and Maintenance Instructions
THE WARRANTY ONLY COVERS BREAKDOWNS REPORTED IN TEXTUAL FORM, THAT IS, IN WRITING,
VIA FAX OR E-MAIL WITHIN THE VALIDITY PERIOD OF THE WARRANTY. ONCE THE VALIDITY PERIOD
HAS EXPIRED, REPORTED BREAKDOWNS WILL NOT BE ACKNOWLEDGED.
Claims concerning the parts of the brush covered by warranty under the aforementioned terms will
only be considered if accompanied by the following documents:
- A copy of the invoice showing the date of delivery to the end customer:
- Serial number of the brush, shown on the label bearing the AGRICOW trademark
- Photo of the motor and/or gearbox label; photo of the electronic card bearing the sensor error
number.
- Photo of the sensor
It is also understood that AGRICOW is not liable for any direct or indirect damages caused to persons
or things by defects and breakdowns of the machine or resulting from forced suspension in its use.
All maintenance operations on the machine must be effected with the power supply switch turned off.
The machine must not be cleaned inside with jets of water which would compromise the electric
components, but using compressed air and brushes. For any maintenance it is mandatory to use at least
type 4 cut resistant gloves in compliance with EN388.
The machine body must be cleaned each month, removing any residue, and the bearings must be greased
using a normal commercially-sold lubricant commonly.

PERIODICAL MAINTENANCE

greasing points
gearbox oil level control
23
EN