Ebode IPV4NVR Guide De Démarrage Rapide page 12

 If there is no UPnP function in your router.
You need to manually add port(HTTPS port) forwarding, refer to the following steps. You
need go to the "Forwarding > Virtual Servers"panel for setup.
Now you can access your NVR by http://domain name:HTTP port via the browser. eg,
http://a6747.myipcamera.org:88
3-12-2014
Click Add New...
Here you have finished the
Port Forwarding setup.
- 12 -
Input the port and
IP address of your
NVR and click Save.
ebode IPV4NVR