Numark PARTY ROCKER Guide D'utilisation page 4

4. Master Volume Control: This adjusts the speaker's main
mix volume, which includes Microphone Input, Auxiliary
Input, and the audio of a paired Bluetooth device.
5. Power LED: Indicates whether PARTY ROCKER is on or
off.
6. Light Mode: There are three modes to select from for how
the strobe lights react to the music.
•
Beat = the light reacts to the beat of the music.
•
Party = dome light spins and changes color whether
there is music playing or not.
•
Off = the lights in the dome can spin and react to the
music playing (depending on the Light Mode that is
selected).
7. Dome: The dome light can spin and react to the music
playing (depending on the Light Mode that is selected).
8. Power Cable Input (IEC): Insert the included power cable here to power the unit.
9. Power ON/OFF Switch: Turns PARTY ROCKER on or off.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also,
try to reduce the overall volume of PARTY ROCKER.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphone away from the speaker.
If you can't hear the microphone over the music volume: Turn down the music volume from your source.
Connecting with a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on PARTY ROCKER and it will automatically go into pairing mode to search for Bluetooth
devices. You will know you are in pairing mode when the LED is off.
3. If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break
previous Bluetooth connections and reset the Bluetooth module.
4. Navigate to your Bluetooth device's setup screen, find "Party Rocker" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
5. Paired LED will light up solid when it is 'paired'.
Note: If you experience trouble pairing or playing music, update your device's OS.
6. To disconnect pairing, press the 'Disconnect' button on PARTY ROCKER.
7. To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
ON
OFF
4
POWER
9
8