Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OVEN SHELF INSTALLATION AND REMOVAL
The oven shelves are provided with a security block to prevent accidental extraction.
They must be inserted operating as per figure 6.2.
To pull them out remove shelf in the inverse order.
Keep attention to insert the shelves correctly (see figure 6.2).
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be
disconnected from the power supply.
– Let the oven cavity and the heating elements cool down;
– Switch off the electrical supply;
– Remove the protective cover (fig. 6.3);
– Unscrew and replace the bulb with a new one suitable for high temperatures (300°C)
having the following specifications: 120V, 60 Hz, 25W, E14
– Refit the protective cover
NOTE: Oven bulb replacement is not covered by your guarantee.
(fig. 6.3)
Safety catch
B
A
6
Fig. 6.2
Fig. 6.3
27
Publicité
Table des Matières
